I had some requests to do a Step by Step, first a bit of background.
The parachute RAB was born during my preparations for the 2007 South African National Championships to be hosted by Western Province on the Cape Streams. During a practise session on Elandspad beat I was catching the odd fish on a black Klinkhammer. I wasn’t satisfied with the results, too many fish came up to the fly refusing it at the last second. There had to be a fly the fish would scrutinise less, a fly that would trigger these finicky fish. For the first time ever I tied on a standard RAB and was very impressed with the results. However, I perceived the RAB to have a few shortcomings, it twisted the tippet rather easily in the windy conditions and as a result of this it wasn’t easy to turn over the leader. Since the RAB has long hackles the hook up to strike ratio wasn’t that great, it still proved much more effective than any other fly.
Back home I decided to incorporate the effectiveness of the RAB into a parachute version, After quite a few attempts I came up with the first “demo models”. The standard ringneck pheasant or goose fibres used for the legs were rather lifeless and I started to experiment with alternative materials. First it was mongoose, still a bit too stiff. Squirrel tail fibres proved to be better and are still the material I use the most. Arctic fox is also great, especially for size #16’s. I kept the basic colour combinations of white, brown and red.
I believe the following factors contribute to the parachute RABs effectiveness.
- When drifting the squirrel legs come to life, gently blow the fly and you will see exactly what I mean. The legs vibrate and every so often a fish will inspect the fly, drift with it and then gently sip it in, classic.
- Because of the above, the fly has a very distinctive ‘presence’. The tippet becomes secondary even when not cutting the surface tension on smooth water.
- Being a parachute pattern it casts much easier in windy conditions.
- Being a parachute pattern the hook up rate is better in my opinion. I also tie a Klinkhammer version when the water is low.
Our team won that year and I took individual gold, of the 20 fish I landed on the river only one didn’t take the parachute RAB, that was the last fish, I didn’t have any parachute RABs left.
Recipe
Hook: Gamakatsu S10 #12 - #16
Thread: 8/0 Red
Tail: Cock hackle fibres or Coq de Leon
Rib: Fine copper wire
Abdomen: Pheasant tail fibres, substitute with Egyptian goose or stripped peacock herl.
Thorax: Peacock herl.
Legs: Squirrel tail fibres.
Post: Fishient Frizz fibre or poly yarn.
[CENTER]Step 1
Strip 6 – 8 fibres stiff fibres (these are found in the top half of the feather) off the feather stem. In The tail should be approximately 1.5 times hook shank length.
Step 2
Tie in the Frizz fibre at the position shown. Cut the fibre at an angle, this will form a tapered under body.
Step 3
Tie in the copper wire, advance the thread to the start of the tail.
Step 4
Leave a short red tag and tie in 2 pheasant tail fibres by the tips. Apply varnish, this with the copper wire makes for a durable fly.
Step 5
Wrap the pheasant tail fibres to a position just short of the post. Counter wrap the copper wire. Take the wire around the front of the post and tie off.
Step 6
Lift the post to a vertical position and wrap thread around the base to keep the post in this position.
Step 7
Tie in approximately 12 squirrel tail hair fibres, this should be 4 times hook shank length and tied in on top facing forward over the hook eye. Tie in the hackle, followed by peacock herl. Wrap the peacock herl, apply varnish to the thread and whip finish.
Bookmarks